Sensi-Clips (Rod Line Clip)

By using a line clip on the rod blank in front of the reel, you can create the optimum angle for bite indication between the spool, hook and buzzer. By changing the position of a line clip, you can fine-tune the bite indication to suit different fishing situations.

By reducing the distance between the clip and the spool (by placing the clip further forward in front of the reel), you can increase the sensitivity of the bite indication, as the greater angle created by the clip to the spool reduces the tension. This is useful when fishing with slack lines and has the effect of making the spool relatively 'lighter'.

Alternatively, for long range fishing, with larger reels, positioning the line clip as far away from the bottom ring/bite indicator as possible (towards the reel) helps to create the maximum potential load on the line and increase bite indication when fishing with tighter line.

Simple to use:

Simply place the clip on the side of the blank at the required distance from the reel. Place the O-ring into the groove on one side of the clip.

Pull the O-ring around the back of the rod blank.

Place the O-ring into the remaining groove making sure the ring is pushed firmly into the channel.

The design of the Sensi-Clip also allows you to adjust the spools without completely pulling the line out of the clip, as the line can be passed through the gap inside the clip if necessary.